Abstract
The world's increasing energy demand, coupled with the depletion of finite energy resources, necessitates a shift towards sustainable energy solutions. This research explores the multifaceted benefits of substituting conventional fossil fuel-based energy sources with renewable energy in industrial settings, with a focus on sustainable manufacturing. A case study was conducted at a printing and packaging factory in Bhubaneswar, Odisha, to analyze economic, environmental, health, safety, and efficiency factors associated with various energy options based on the Madhab’s EEE (Environmental, Efficiency, Economic) impact analysis method. The study identified solar power generation as the optimal energy source, boasting the lowest EEE impact index of 1.90. Wind energy ranked second, followed by conventional GRID power and DG (Diesel Generator) power sources, which were found to be less favorable due to their higher EEE impact indices. Feasibility assessments revealed that the factory had ample rooftop and vacant land space for solar power plant installation, making it self-sufficient in power generation. The return on investment (ROI) for the solar power project was calculated to be 5.54 years, making it a viable option from a sustainability perspective. Moreover, the solar system could be integrated with the GRID through a reverse metering system, enabling excess energy to be sold back to the GRID. This research underscores the significance of transitioning to renewable energy sources in industries for environmental sustainability, energy security, and economic benefits. It emphasizes the need for similar studies in diverse industrial settings to identify the most suitable energy sources, considering all relevant factors.
References
Lu Y, Nakicenovic N, Visbeck M, Stevance A. Policy: Five priorities for the UN sustainable development goals. Nature. 2015; 520: 432-3. https://doi.org/10.1038/520432a
Owusu PA, Asumadu-Sarkodie S. A review of renewable energy sources, sustainability issues and climate change mitigation. Cogent Eng. 2016; 3: Article: 1167990. https://doi.org/10.1080/23311916.2016.1167990
Chandra JM, Kumar MS, Sekhar MH. Experimental investigation on maximizing conveying efficiency of belt conveyors used in series application and estimation of power consumption through statistical analysis. Environ Prog Sustain Energy. 2022; 42(3): 1-11. https://doi.org/10.1002/ep.1403
Chandra JM, Kumar MS, Sekhar MH. Effect of particle size on collection efficiency of ESP and RABH: a case study. Aerosol Sci Eng. 2019; 75-87. https://doi.org/10.1007/s41810-019-00045-2
Global Sustainable Development Report (GSDR) 2019: the future is now – Science for achieving sustainable development. New York: 2019. Available from: https://sdgs.un.org/gsdr/gsdr2019 (accessed on November 26, 2023).
IPCC- International Panel on Climate Change IPCC - special report on 1.5 degrees. Geneva: 2018. Available from: https://www.ipcc.ch/sr15/ (accessed on November 26, 2023).
Lohrmann A, Farfan J, Caldera U, Lohrmann C, Breyer C. Global scenarios for significant water use reduction in thermal power plants based on cooling water demand estimation using satellite imagery. Nat Energy. 2019; 4: 1040-8. https://doi.org/10.1038/s41560-019-0501-4
Renewables 2020 Global Status Report. Paris: 2020. Available from: https://www.ren21.net/gsr-2020/ (accessed on December 15, 2023).
Ram M, Child M, Aghahosseini A, Bogdanov D, Lohrmann A, Breyer C. A comparative analysis of electricity generation costs from renewable, fossil fuel and nuclear sources in G20 countries for the period 2015–2030. J Clean Prod. 2018; 199: 687-704. https://doi.org/10.1016/j.jclepro.2018.07.159
Fesli U, Bayir R, Özer M. Design and implementation of a domestic solar-wind hybrid energy system. Proceedings of the International Conference on Electrical and Electronics Engineering, Bursa, Turkey: 5-8 November 2009, I-29-I-33.
Amutha WM, Rajini V. Techno-economic evaluation of various hybrid power systems for rural telecom. Renew Sustain Energy Rev. 2015; 43: 553-61. https://doi.org/10.1016/j.rser.2014.10.103
Nafeh AESA. Optimal economical sizing of a pv-wind hybrid energy system using genetic algorithm. Int J Green Energy. 2011; 8: 25-43. https://doi.org/10.1080/15435075.2010.529407
Dursun B, Gokcol C, Umut I, Ucar E, Kocabey S. Techno-economic evaluation of a hybrid PV-wind power generation system. Int J Green Energy. 2013; 10: 117-36. https://doi.org/10.1080/15435075.2011.641192
HMER. Available from: http://homerenergy.com (accessed on November 26, 2023).
Ataei A, Biglari M, Nedaei M, Assareh E, Choi JK, Yoo C, Adaramola MS. Techno-economic feasibility study of autonomous hybrid wind and solar power systems for rural areas in Iran, a case study in Moheydar Village. Environ Prog Sustain Energy. 2015; 34: 1521-7. https://doi.org/10.1002/ep.12121
Shahinzadeh H, Abadi MMN, Hajahmadi M, Paknejad A. Design and Economic Study for Use the Photovoltaic Systems for Electricity Supply in Is-fahan Museum Park. Int J Power Electr Drive Sys. 2013; 3: 83-94. https://doi.org/10.11591/ijpeds.v3i1.1797
Fulzele JB, Dutt S. Optimium planning of hybrid renewable energy system using HOMER. Int J Electr Comput Eng. 2011; 2: 68-74. https://doi.org/10.11591/ijece.v2i1.157
Jenkins P, Elmnifi M, Younis A, Emhamed A. Hybrid power generation by usin solar and wind energy case study. World J Mech. 2019; 9: 81-93. https://doi.org/10.4236/wjm.2019.94006
http://www.windustry.org/community-wind/toolbox/chapter-15-turbine-selection- and purchase
International Renewable Energy Agency (IRENA). Renewable Energy Technologies Cost analysis Series. 2012); Volume 1: Power Sector, Issue 5/5, Wind Power.
Operational and Maintenance Costs for Wind Turbines. Available from: http://www.windmeasurementinternational.com/wind-turbines/om-turbines.php (accessed on November 26, 2023).
Lutterbeck CA, Garcia DDS, Colares GS, Kist LT, Machado ÊL. Environmental and economic impacts associated with the use of boilers of a steam generator system at a tobacco manufacturing industry. Environ Challen. 2021; (5): 100323. https://doi.org/10.1016/j.envc.2021.100323
Yang H-H, Arafath SM, Lee K-T, Yueh-Shu H. Chemical characteristics of filterable and condensable PM2.5 emissions from industrial boilers with five different fuels. Fuel. 2018; 232: 415-22. https://doi.org/10.1016/j.fuel.2018.05.080
Bian H. Analysis on flue gas pollution of coal-fired boiler and its countermeasures. 2020 IOP Conf Ser Earth Environ Sci. 2020; 450: 012028. https://doi.org/10.1088/1755-1315/450/1/012028
Karademir A. Evaluation of the potential air pollution from fuel combustion in industrial boilers in Kocaeli, Turkey. 2006; 86(12-13): 1894-1903. https://doi.org/10.1016/j.fuel.2006.01.026
Jena MC, Mishra SK, Moharana HS. A study on economic, efficiency and environment (EEE) impact of different fuels used in boilers to assist decision making in fuel conversion and enhance sustainability. Environ Prog Sustain Energy. 2023; 42(4): e14134. https://doi.org/10.1002/ep.14134
Dwivedi P, Sudhakar K, Soni A, Solomin E, Kirpichnikova I. Advanced cooling techniques of P.V. modules: A state of art. Case Stud Therm Eng. 2020; 21: 100674. https://doi.org/10.1016/j.csite.2020.100674
United States Environmental Protection Agency. Renewable Energy Fact Sheet: Wind Turbines. Office of Wastewater Management; EPA 832-F-13-01. Available from: https://www.epa.gov/sites/default/files/2019-08/documents/wind_turbines_fact_sheet_p100il8k.pdf
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright (c) 2023 Madhab C. Jena, Sarat K. Mishra, Himanshu S. Moharana