Keywords
Solar
Flat plate
Evacuated tube
How to Cite
Abstract
The Ejector refrigeration system can operate using renewable energy such as solar or wasted heat. A mathematical model for an ejector refrigeration system powered by solar energy was developed. The Ejector refrigeration system depends on many factors, such as ejector geometry, NXP, and operating conditions. A flat plate solar collector is designed to predict the heat transfer performance for the whole system, and the primary factors affecting the heat transfer performance. Outlet temperature of 134.95 °C was achieved from the setup of five solar collectors (two square meters each) when the solar irradiance was 985.69 W/m2. The water needs total power of 5016 W to reach this temperature.References
Sun, D.-W., Comparative study of the performance of an ejector refrigeration cycle operating with various refrigerants. Energy Conversion and Management, 1999. 40(8): p. 873-884.
Varga, S., A.C. Oliveira, and B. Diaconu, Influence of geometrical factors on steam ejector performance – A numerical assessment. International Journal of Refrigeration, 2009. 32(7): p. 1694-1701. http://doi.org/10.1016/j.ijrefrig.2009.05.009
Wang, L., et al., Numerical study on optimization of ejector primary nozzle geometries. International Journal of Refrigeration, 2017. 76: p. 219-229. http://dx.doi.org/doi: 10.1016/j.ijrefrig.2017.02.010
WB, G., Principle of refrigeration. 1982: Cambridge University Press. https://www.worldcat.org/title/principles-ofrefrigeration/oclc/453028295
Yapıcı, R., Experimental investigation of performance of vapor ejector refrigeration system using refrigerant R123. Energy Conversion and Management, 2008. 49(5): p. 953- 961. http://doi.org/10.1016/j.enconman.2007.10.006
Yapıcı, R. and H.K. Ersoy, Performance characteristics of the ejector refrigeration system based on the constant area ejector flow model. Energy Conversion and Management, 2005. 46(18): p. 3117-3135. http://doi.org/10.1016/j.enconman.2005.01.010
Yapıcı, R., et al., Experimental determination of the optimum performance of ejector refrigeration system depending on ejector area ratio. International Journal of Refrigeration, 2008. 31(7): p. 1183-1189. http://doi.org/10.1016/j.ijrefrig.2008.02.010
Yen, R.H., et al., Performance optimization for a variable throat ejector in a solar refrigeration system. International Journal of Refrigeration, 2013. 36(5): p. 1512-1520. http://doi.org/10.1016/j.ijrefrig.2013.04.005
Arbel, A., et al., Ejector Irreversibility Characteristics. Journal of Fluids Engineering, 2003. 125(1): p. 121-129. http://doi.org/10.3390/en9030212
B.ELHUB, MOHAMED AZLY ABDUL AZIZ, and MOHD KHAIRUL ANUAR BIN SHRIF SOHIF MAT, Review of ejector design parameters and geometry for refrigeration and air conditioning application. Computer Applications in Environmental Sciences and Renewable Energy, 2014.
Besagni, G., R. Mereu, and F. Inzoli, Ejector refrigeration: A comprehensive review. Renewable and Sustainable Energy Reviews, 2016. 53: p. 373-407. https://doi.org/10.1016/j.rser.2015.08.059
Chaiwongsa, P. and S. Wongwises, Experimental study on R-134a refrigeration system using a two-phase ejector as an expansion device. Applied Thermal Engineering, 2008. 28(5): p. 467-477. https://doi.org/10.1016/j.applthermaleng.2007.05.005
Chandra, V.V. and M.R. Ahmed, Experimental and computational studies on a steam jet refrigeration system with constant area and variable area ejectors. Energy Conversion and Management, 2014. 79: p. 377-386. https://doi.org/10.1016/j.enconman.2013.12.035
Chen, J., H. Havtun, and B. Palm, Investigation of ejectors in refrigeration system: Optimum performance evaluation and ejector area ratios perspectives. Applied Thermal Engineering, 2014. 64(1): p. 182-191. https://doi.org/10.1016/j.applthermaleng.2013.12.034
Chen, W., et al., Theoretical analysis of ejector refrigeration system performance under overall modes. Applied Energy, 2017. 185: p. 2074-2084. https://doi.org/10.1016/j.apenergy.2016.01.103
Chunnanond, K. and S. Aphornratana, Ejectors: applications in refrigeration technology. Renewable and Sustainable Energy Reviews, 2004. 8(2): p. 129-155. https://doi.org/10.1016/j.rser.2003.10.001
Chunnanond, K. and S. Aphornratana, An experimental investigation of a steam ejector refrigerator: the analysis of the pressure profile along the ejector. Applied Thermal Engineering, 2004. 24(2): p. 311-322. https://doi.org/10.1016/j.applthermaleng.2003.07.003
Dennis, M. and K. Garzoli, Use of variable geometry ejector with cold store to achieve high solar fraction for solar cooling. International Journal of Refrigeration, 2011. 34(7): p. 1626- 1632. https://doi.org/10.1016/j.ijrefrig.2010.08.006
Dong, J., et al., An experimental investigation of steam ejector refrigeration system powered by extra low temperature heat source. International Communications in Heat and Mass Transfer, 2017. 81(Supplement C): p. 250- 256. https://doi.org/10.1016/j.icheatmasstransfer.2016.12.022
Dong, J., et al., An Experimental Investigation of Steam Ejector Refrigeration Systems. Journal of Thermal Science and Engineering Applications, 2012. 4(3): p. 031004- 031004-7. https://doi.org/10.1115/1.4006714
Eames, I.W., S. Aphornratana, and H. Haider, A theoretical and experimental study of a small-scale steam jet refrigerator. International Journal of Refrigeration, 1995. 18(6): p. 378-386. https://doi.org/10.1016/0140-7007(95)98160-m
Eames, I.W., et al., The design, manufacture and testing of a jet-pump chiller for air conditioning and industrial application. Applied Thermal Engineering, 2013. 58(1): p. 234-240. https://doi.org/10.1016/j.applthermaleng.2013.04.028
Elbel, S. and N. Lawrence, Review of recent developments in advanced ejector technology. International Journal of Refrigeration, 2016. 62: p. 1-18. https://doi.org/10.1016/j.ijrefrig.2015.10.031
Galanis, N. and M. Sorin, Ejector design and performance prediction. International Journal of Thermal Sciences, 2016. 104: p. 315-329. https://doi.org/10.1016/j.ijthermalsci.2015.12.022
Grazzini, G., A. Milazzo, and D. Paganini, Design of an ejector cycle refrigeration system. Energy Conversion and Management, 2012. 54(1): p. 38-46. https://doi.org/10.1016/j.enconman.2011.09.015
Hernandez, J.I., et al., The Behavior of an Ejector Cooling System Operating with Refrigerant Blends 410A and 507. Energy Procedia, 2014. 57: p. 3021-3030. https://doi.org/10.1016/j.egypro.2014.10.338
Holtzapple, M.T., High-Efficiency Jet Ejector. Invention Disclosure, Texas A&M University, 2001.
Huang, B.J., et al., A 1-D analysis of ejector performance. International Journal of Refrigeration, 1999. 22(5): p. 354- 364. https://dx.doi.org/10.1016/S0140-7007(99)00004-3
J.H. Keenan, E.P.N., F. Lustwerk, An Investigation of Ejector Design by Analysis and Experiment. Journal of Applied Mechanics, Trans.,ASME 1950. 72(299-309). http://dx.doi.org/10.1016/j.ijrefrig.2011.06.001
Jia, Y. and C. Wenjian, Area ratio effects to the performance of air-cooled ejector refrigeration cycle with R134a refrigerant. Energy Conversion and Management, 2012. 53(1): p. 240-246. http://dx.doi.org/10.1016/j.enconman.2011.09.002
Kong, F.S., et al., Application of Chevron Nozzle to a Supersonic Ejector–diffuser System. Procedia Engineering, 2013. 56(Supplement C): p. 193-200. http://dx.doi.org/10.1016/j.proeng.2013.03.107
Li, F., et al., Experimental investigation on a R134a ejector refrigeration system under overall modes. Applied Thermal Engineering, 2018. 137: p. 784-791.
Milazzo, A., A. Rocchetti, and I.W. Eames, Theoretical and Experimental Activity on Ejector Refrigeration. Energy Procedia, 2014. 45: p. 1245-1254. http://dx.doi.org/10.1016/j.egypro.2014.01.130
Sait, H.H., et al., Fresnel-based modular solar fields for performance/cost optimization in solar thermal power plants: A comparison with parabolic trough collectors. Applied Energy, 2015. 141(Supplement C): p. 175-189. http://dx.doi.org/10.1016/j.apenergy.2014.11.074
Ma, X., et al., Experimental investigation of a novel steam ejector refrigerator suitable for solar energy applications. Applied Thermal Engineering, 2010. 30(11): p. 1320-1325. http://dx.doi.org/10.1016/j.applthermaleng.2010.02.011
Allouche, Y., C. Bouden, and S. Riffat, A Solar-Driven Ejector Refrigeration System for Mediterranean Climate: Experience Improvement and New Results Performed. Energy Procedia, 2012. 18: p. 1115-1124. http://dx.doi.org/10.1016/j.egypro.2012.05.126
Göktun, S., Optimization of irreversible solar assisted ejector-vapor compression cascaded systems. Energy Conversion and Management, 2000. 41(6): p. 625-631.
Gil, B. and J. Kasperski, Performance Analysis of a Solarpowered Ejector Air-conditioning Cycle with Heavier Hydrocarbons as Refrigerants. Energy Procedia, 2014. 57: p. 2619-2628. https://doi.org/10.1016/j.egypro.2014.10.273
Bellos, Evangelos & Tzivanidis, Christos. (2017). Optimum design of a solar ejector refrigeration system for various operating scenarios. Energy Conversion and Management. 154. 10.1016/j.enconman.2017.10.057. https://doi.org/10.1016/j.egypro.2012.05.126
Diaconu, B.M., Energy analysis of a solar-assisted ejector cycle air conditioning system with low temperature thermal energy storage. Renewable Energy, 2012. 37(1): p. 266- 276. https://doi.org/10.1016/j.renene.2011.06.031
Śmierciew, K., et al., Experimental investigations of solar driven ejector air-conditioning system. Energy and Buildings, 2014. 80: p. 260-267. https://doi.org/10.1016/j.enbuild.2014.05.033
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright (c) 2021 Global Journal of Energy Technology Research Updates